Premium V-hold Machinery wholesale supplier: Founded in 1996, V-HOLD have more than 20 years of professional four-sided plane production, to create China’s four-sided plane first brand and commits itself to provide the most secure, reliable, efficient, energy-saving, economical production equipment for the customers around the world. Nowadays, most of the products including 4-Side Moulder, Multiple Rip Saw, Multiple Rip Saw with Double Side Planner, and Automotive Floor Production Line have passed ISO9001: 2000 quality system. Find even more info on V-hold Machinery.
The radial arm saw is pretty much a portable circular saw that glides on an adjustable arm suspended over a fixed cutting surface. The blade and motor are connected to the arm by a yoke, which is adjustable along both horizontal and vertical planes, enabling the saw to be swung in a variety of directions. For cross-cut work, position the board flush with the fence at the rear of the saw and draw the blade across the wood. The bevel lock allows the saw to be tilted for cutting angles. You can set it to the desired angle using the protractor on the saw housing. The saw can be swivelled right or left for mitring, or turned a full 90 degrees for ripping. The blade can also be raised or lowered using a crank. The size of the saw is determined by the dimension of the blade the saw can accommodate. As an example a model using a 10 inch blade would be able to cut work-pieces up to 3 inches thick.
Up-acting machines can limit staged bending because of the possibility of ram tilt, staged bending may not be a viable option on an up-acting machine. Because staged bending utilises multiple stations on one machine, if any of the stations on an up-acting machine are too far from the centre, ram tilt may result. Hydraulic presses come in many different forms and are used in many different industries. The basic structure to all presses is a heavy-duty main frame with hydraulic cylinders. The number of cylinders are dependent on the pressure requirement. They are operated by a hydraulic power pack. The presses can be manufactured with heated or cold platens and can have conveyors fitted to make the presses automated.
Sanding is the operation of finishing wooden items after they have been machined. Essentially, a sanding machine performs a sand papering job to produce a uniformly sanded surface. Three common types of sanding machines are : Belt sander; Spindle sander; Disc sander. It has an endless cloth backed abrasive belt which runs over two drums and is used for sanding and shaping flat surfaces. One of the drums is rotated by an electric motor and serves as the driver, while the other supports the belt and keeps it in proper tension. For sanding work by the abrasive belt, the the workpiece is supported by an adjustable table that may be tilted to any desired angle.
Pressure generated by machine presses: Machine presses rely on high pressure to perform their intended applications. Heavy duty presses use around 1 to 30 tons of pressure. As a result, they are able to reshape most materials, including bronze, copper, aluminium, iron, steel, wood and composites. The high pressure of a press squashes even the hardest metals, allowing manufacturing companies to reshape wood or metal work-pieces into their desired shape. Through-feed presses are those where the introduction of panels between the plates and their extraction are fully automated in order to reduce the working cycle and manpower costs.
The next woodworking machines are band saws. The band saw is designed to cut wood by means of an endless metal saw band that travels over the rims of two or more rotating wheels. Other parts of a band saw are frame, table, saw guides, saw tensioning arrangement, etc. Although the number of operation that can be performed on a band saw is less than those of a circular saw, it is most useful for making curved or irregular cuts in wood.
A drill press is simply a fixed in place version of a hand drill, it’s great for precise work. With an adjustable table beneath the chuck with a hole in its centre, a spinning drill bit can pass cleanly through a work-piece. Drill presses come as either freestanding floor models or for worktops. The drill press is powered by an electric motor, driving it via a system of pulleys or gears. The drill bit is locked into the chuck, then driven down using a hand powered lever system, and a spring pushes it back up when pressure on the lever is released. A number of adjustments including a moveable table depth, a depth gauge to set the distance the spindle travels and pulley adjustments to change speeds increases the tools functionality. Read even more details at v-holdmachinery.com.